Helical

0.1875" (3/16) Shank DIA x 60° Included Angle x 2.0000" (2) Overall Length X 0.0180" Tip DIA Carbide Chamfer Mill, 2 Flutes, Uncoated - (HCM60-20187)

0.1875" (3/16) Shank DIA x 120° Included Angle x 2.0000" (2) Overall Length X 0.0180" Tip DIA Carbide Chamfer Mill, 4 Flutes, Uncoated - (HCM120-40187)

0.1875" (3/16) Shank DIA x 120° Included Angle x 2.0000" (2) Overall Length X 0.0180" Tip DIA Carbide Chamfer Mill, 2 Flutes, Uncoated - (HCM120-20187)

0.2500" (1/4) Shank DIA x 120° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0200" Tip DIA Carbide Chamfer Mill, 4 Flutes, Uncoated - (HCM120-40250)

8.000 mm Cutter DIA x 8.000 mm Shank DIA x 12.000 mm Length of Cut x 63.000 mm Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (MH35AL-015-30800)

3.000 mm Cutter DIA x 6.000 mm Shank DIA x 4.500 mm Length of Cut x 63.000 mm Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (MH35AL-015-30300)

0.1250" (1/8) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.6250" (5/8) Length of Cut x 2.0000" (2) Overall Length x 0.7500" (3/4) Reach Carbide Tapered Square End Mill, 5 Flutes, APLUS Coated - (HTPR005-050-50125)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0150" (1/64) Radius x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-S-30125-R.015)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0200" Radius x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-S-30125-R.020)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-S-30125-R.010)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0300" Radius x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-S-30125-R.030)

3.000 mm Cutter DIA x 6.000 mm Shank DIA x 6.000 mm Length of Cut x 63.000 mm Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (MH35AL-020-30300)

0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0100" Radius x 0.4375" (7/16) Length of Cut x 2.0000" (2) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-S-30312-R.010)

0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0300" Radius x 0.4375" (7/16) Length of Cut x 2.0000" (2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-S-30312-R.030)

0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0600" Radius x 0.4375" (7/16) Length of Cut x 2.0000" (2) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-S-30312-R.060)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide 45° Helix Ball End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-S-20125-BN)

0.1250" (1/8) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0300" Radius x 0.2500" (1/4) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Corner Radius End Mill for Aluminum, 5 Flutes, Uncoated - (HVAL-020-50125-R.030)

8.000 mm Cutter DIA x 8.000 mm Shank DIA x 1.000 mm Radius x 12.000 mm Length of Cut x 63.000 mm Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (MH35AL-015-30800-R1.00)

0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0300" Radius x 0.5000" (1/2) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H35ALV-C-020-30250-R.030)

8.000 mm Cutter DIA x 8.000 mm Shank DIA x 0.500 mm Radius x 12.000 mm Length of Cut x 63.000 mm Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (MH35AL-015-30800-R0.50)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-S-30125-R.010)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0200" Radius x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-S-30125-R.020)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0300" Radius x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-S-30125-R.030)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0150" (1/64) Radius x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-S-30125-R.015)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0050" Radius x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide Corner Radius End Mill for Steel, 5 Flutes, APLUS Coated - (HEV-S-50125-R.005)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-S-20125)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0080" Radius x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide Corner Radius End Mill for Steel, 5 Flutes, APLUS Coated - (HEV-S-50125-R.008)

3.000 mm Cutter DIA x 6.000 mm Shank DIA x 0.500 mm Radius x 4.500 mm Length of Cut x 63.000 mm Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (MH35AL-015-30300-R0.50)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-S-30125)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-S-30125)

0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.0100" Radius x 0.5625" (9/16) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-R-20187-R.010)

0.1250" (1/8) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0300" Radius x 0.3750" (3/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Corner Radius End Mill for Aluminum, 5 Flutes, Uncoated - (HVAL-030-50125-R.030)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0050" Radius x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide Corner Radius End Mill for Steel, 5 Flutes, APLUS Coated - (HEV-SR-50125-R.005)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0080" Radius x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide Corner Radius End Mill for Steel, 5 Flutes, APLUS Coated - (HEV-SR-50125-R.008)

6.000 mm Cutter DIA x 6.000 mm Shank DIA x 9.000 mm Length of Cut x 63.000 mm Overall Length Carbide Square End Mill for Steel, 7 Flutes, APLUS Coated - (MHEV-015-70600)

0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0200" Radius x 0.5000" (1/2) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H35ALV-C-020-30250-R.020)

8.000 mm Cutter DIA x 8.000 mm Shank DIA x 0.500 mm Radius x 16.000 mm Length of Cut x 63.000 mm Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (MH35AL-020-30800-R0.50)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0150" (1/64) Radius x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-SR-30125-R.015)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-SR-30125-R.010)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0200" Radius x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-SR-30125-R.020)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0300" Radius x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-SR-30125-R.030)

3.000 mm Cutter DIA x 6.000 mm Shank DIA x 9.000 mm Length of Cut x 63.000 mm Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (MH35AL-030-30300)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, ZPLUS Coated - (H45AL-S-20125)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0050" Radius x 0.5000" (1/2) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Corner Radius End Mill for Steel, 5 Flutes, APLUS Coated - (HEV-R-50125-R.005)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide Square End Mill for Steel, 3 Flutes, APLUS Coated - (HSV-S-30125)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0080" Radius x 0.5000" (1/2) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Corner Radius End Mill for Steel, 5 Flutes, APLUS Coated - (HEV-R-50125-R.008)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-S-30125)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H45AL-S-30125)

3.000 mm Cutter DIA x 6.000 mm Shank DIA x 0.500 mm Radius x 6.000 mm Length of Cut x 63.000 mm Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (MH35AL-020-30300-R0.50)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide Corner Radius End Mill for Steel, 5 Flutes, APLUS Coated - (HEV-S-50125-R.010)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 45° Helix Ball End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-SR-20125-BN)

4.000 mm Cutter DIA x 6.000 mm Shank DIA x 6.000 mm Length of Cut x 63.000 mm Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (MH35AL-015-30400)

3.000 mm Cutter DIA x 6.000 mm Shank DIA x 4.500 mm Length of Cut x 63.000 mm Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (MHEV-015-50300)

0.1250" (1/8) Shank DIA x 120° Included Angle x 2.0000" (2) Overall Length X 0.0150" (1/64) Tip DIA Carbide Chamfer Mill, 2 Flutes, Uncoated - (HCM120-20125)

0.1250" (1/8) Shank DIA x 90° Included Angle x 2.0000" (2) Overall Length X 0.0150" (1/64) Tip DIA Carbide Chamfer Mill, 2 Flutes, Uncoated - (HCM90-20125)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-SR-30125-R.010)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.5000" (1/2) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Steel, 3 Flutes, APLUS Coated - (HSV-R-30125)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0200" Radius x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-SR-30125-R.020)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0300" Radius x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-SR-30125-R.030)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0150" (1/64) Radius x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-SR-30125-R.015)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide 45° Helix Ball End Mill for Aluminum, 2 Flutes, ZPLUS Coated - (H45AL-S-20125-BN)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide Corner Radius End Mill for Steel, 4 Flutes, APLUS Coated - (HSV-S-40125-R.010)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (HEF-S-50125)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-SR-20125)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.5000" (1/2) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Corner Radius End Mill for Steel, 5 Flutes, APLUS Coated - (HEV-R-50125-R.010)

0.1250" (1/8) Shank DIA x 60° Included Angle x 2.0000" (2) Overall Length X 0.0150" (1/64) Tip DIA Carbide Chamfer Mill, 2 Flutes, Uncoated - (HCM60-20125)

3.000 mm Cutter DIA x 6.000 mm Shank DIA x 6.000 mm Length of Cut x 63.000 mm Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (MHEV-020-50300)

0.3125" (5/16) Shank DIA x 60° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0280" Tip DIA Carbide Chamfer Mill, 2 Flutes, Uncoated - (HCM60-20312)

0.1250" (1/8) Shank DIA x 120° Included Angle x 1.5000" (1-1/2) Overall Length X 0.0100" Tip DIA Carbide Chamfer Mill, 2 Helical Flutes, APLUS Coated - (HPCM120-20125)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (HEV-S-50125)

0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.0100" Radius x 0.3125" (5/16) Length of Cut x 2.0000" (2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-S-30187-R.010)

0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.0150" (1/64) Radius x 0.3125" (5/16) Length of Cut x 2.0000" (2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-S-30187-R.015)

0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.0200" Radius x 0.3125" (5/16) Length of Cut x 2.0000" (2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-S-30187-R.020)

0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.0300" Radius x 0.3125" (5/16) Length of Cut x 2.0000" (2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-S-30187-R.030)

0.1250" (1/8) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.2500" (1/4) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Aluminum, 5 Flutes, Uncoated - (HVAL-020-50125)

0.1250" (1/8) Shank DIA x 120° Included Angle x 2.0000" (2) Overall Length X 0.0150" (1/64) Tip DIA Carbide Chamfer Mill, 2 Flutes, APLUS Coated - (HCM120-20125)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.5000" (1/2) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Corner Radius End Mill for Steel, 4 Flutes, APLUS Coated - (HSV-R-40125-R.010)

0.3125" (5/16) Shank DIA x 60° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0280" Tip DIA Carbide Chamfer Mill, 4 Flutes, Uncoated - (HCM60-40312)

0.1250" (1/8) Shank DIA x 90° Included Angle x 2.0000" (2) Overall Length X 0.0150" (1/64) Tip DIA Carbide Chamfer Mill, 2 Flutes, APLUS Coated - (HCM90-20125)

0.1250" (1/8) Shank DIA x 60° Included Angle x 2.0000" (2) Overall Length X 0.0150" (1/64) Tip DIA Carbide Chamfer Mill, 2 Flutes, APLUS Coated - (HCM60-20125)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-SR-30125)

4.000 mm Cutter DIA x 6.000 mm Shank DIA x 8.000 mm Length of Cut x 63.000 mm Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (MH35AL-020-30400)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-SR-30125)

0.1250" (1/8) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length x 0.5000" (1/2) Reach Carbide Tapered Ball End Mill, 4 Flutes, APLUS Coated - (HTPR015-030-40125-BN)

3.000 mm Cutter DIA x 6.000 mm Shank DIA x 9.000 mm Length of Cut x 63.000 mm Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (MHEV-030-50300)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, ZPLUS Coated - (H45AL-SR-20125)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (HEV-SR-50125)

3.000 mm Cutter DIA x 6.000 mm Shank DIA x 4.500 mm Length of Cut x 63.000 mm Overall Length Carbide Square End Mill for Steel, 4 Flutes, APLUS Coated - (MHSV-015-40300)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide Square End Mill for Steel, 7 Flutes, APLUS Coated - (HEV-S-70125)

3.000 mm Cutter DIA x 6.000 mm Shank DIA x 4.500 mm Length of Cut x 63.000 mm Overall Length Carbide Ball End Mill for Steel, 4 Flutes, APLUS Coated - (MHSV-015-40300-BN)

0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 2.0000" (2) Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (HEV-S-50312)

8.000 mm Cutter DIA x 8.000 mm Shank DIA x 0.500 mm Radius x 24.000 mm Length of Cut x 75.000 mm Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (MH35AL-030-30800-R0.50)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H45AL-SR-30125)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-SR-30125)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-S-30125-R.010)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0300" Radius x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-S-30125-R.030)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0200" Radius x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-S-30125-R.020)

3.000 mm Cutter DIA x 6.000 mm Shank DIA x 6.000 mm Length of Cut x 63.000 mm Overall Length Carbide Square End Mill for Steel, 4 Flutes, APLUS Coated - (MHSV-020-40300)

3.000 mm Cutter DIA x 6.000 mm Shank DIA x 6.000 mm Length of Cut x 63.000 mm Overall Length Carbide Ball End Mill for Steel, 4 Flutes, APLUS Coated - (MHSV-020-40300-BN)

0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.2500" (1/4) Length of Cut x 1.5000" (1-1/2) Overall Length Carbide Square End Mill for Steel, 6 Flutes, APLUS Coated - (HEV-S-60125)