Miniature High Performance Drills - Prehardened St

0.742 mm Drill DIA x 3.500 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.0200" (.5 mm) Drill DIA x 0.0960" Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.508 mm Drill DIA x 2.400 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.762 mm Drill DIA x 3.600 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.0260" Drill DIA x 0.1240" Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.584 mm Drill DIA x 2.800 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.610 mm Drill DIA x 2.900 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.0225" Drill DIA x 0.1080" Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.559 mm Drill DIA x 2.700 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.533 mm Drill DIA x 2.500 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.660 mm Drill DIA x 3.100 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.572 mm Drill DIA x 2.700 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.635 mm Drill DIA x 3.000 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.500 mm Drill DIA x 2.400 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.711 mm Drill DIA x 3.400 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.0250" Drill DIA x 0.1200" Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.686 mm Drill DIA x 3.300 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.432 mm Drill DIA x 2.100 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.381 mm Drill DIA x 1.800 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.0350" (.9 mm) Drill DIA x 0.1680" Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.990 mm Drill DIA x 4.800 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.0100" Drill DIA x 0.0480" Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.292 mm Drill DIA x 1.400 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.0156" (1/64) Drill DIA x 0.0740" Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.356 mm Drill DIA x 1.700 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.965 mm Drill DIA x 4.600 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.889 mm Drill DIA x 4.200 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.279 mm Drill DIA x 1.350 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.900 mm Drill DIA x 6.000 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.397 mm Drill DIA x 1.900 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.0312" (1/32) Drill DIA x 0.1480" Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.305 mm Drill DIA x 1.450 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.457 mm Drill DIA x 2.200 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.318 mm Drill DIA x 1.500 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.267 mm Drill DIA x 1.250 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.406 mm Drill DIA x 2.000 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.939 mm Drill DIA x 4.400 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.800 mm Drill DIA x 3.800 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.812 mm Drill DIA x 3.900 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.900 mm Drill DIA x 4.200 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.330 mm Drill DIA x 1.550 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.254 mm Drill DIA x 1.200 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.793 mm Drill DIA x 3.800 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.0320" Drill DIA x 0.1520" Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.483 mm Drill DIA x 2.300 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.787 mm Drill DIA x 3.700 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.914 mm Drill DIA x 4.400 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.343 mm Drill DIA x 1.650 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.368 mm Drill DIA x 1.750 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.838 mm Drill DIA x 4.000 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.200 mm Drill DIA x 0.950 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.211 mm Drill DIA x 1.000 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.241 mm Drill DIA x 1.150 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.221 mm Drill DIA x 1.050 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.231 mm Drill DIA x 1.100 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.0225" Drill DIA x 0.1520" Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.742 mm Drill DIA x 5.000 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.762 mm Drill DIA x 5.200 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.500 mm Drill DIA x 3.400 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.508 mm Drill DIA x 3.400 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.533 mm Drill DIA x 3.600 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.0250" Drill DIA x 0.1680" Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.0200" (.5 mm) Drill DIA x 0.1360" Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.0260" Drill DIA x 0.1760" Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.635 mm Drill DIA x 4.200 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.660 mm Drill DIA x 4.400 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.686 mm Drill DIA x 4.600 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.572 mm Drill DIA x 3.900 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.584 mm Drill DIA x 3.900 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.559 mm Drill DIA x 3.800 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.600 mm Drill DIA x 4.000 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.700 mm Drill DIA x 4.800 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.610 mm Drill DIA x 4.200 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.711 mm Drill DIA x 4.800 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.838 mm Drill DIA x 5.600 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.889 mm Drill DIA x 6.000 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.812 mm Drill DIA x 5.400 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.787 mm Drill DIA x 5.400 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.793 mm Drill DIA x 5.400 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.800 mm Drill DIA x 5.400 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.914 mm Drill DIA x 6.200 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.939 mm Drill DIA x 6.400 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.990 mm Drill DIA x 6.600 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.965 mm Drill DIA x 6.600 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.0350" (.9 mm) Drill DIA x 0.2400" Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.0312" (1/32) Drill DIA x 0.2080" Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.0320" Drill DIA x 0.2160" Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.318 mm Drill DIA x 2.100 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.305 mm Drill DIA x 2.100 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.330 mm Drill DIA x 2.200 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.343 mm Drill DIA x 2.300 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.356 mm Drill DIA x 2.400 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.254 mm Drill DIA x 1.700 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.267 mm Drill DIA x 1.800 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.279 mm Drill DIA x 1.900 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.457 mm Drill DIA x 3.100 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.483 mm Drill DIA x 3.300 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.292 mm Drill DIA x 2.000 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.300 mm Drill DIA x 2.000 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated

0.381 mm Drill DIA x 2.600 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated